Job Description

:

Role Proficiency:

Electrical: Independently develop professional cost effective wire harness designs using knowledge of electrical engineering principles applicable to the design of wire harnesses and vehicle electrical systems.rnMechanical: Independently develop professional cost effective designs for Hydraulic Structural Components and Weld using knowledge of mechanical engineering principles including FEA; estimate and compute calculations as required.

Outcomes:

\xc2\xb7 Electrical:

• Development of wire harness routing designs in 3D which includes ensuring secure routing of harness to corresponding connectors.
• Development of 2D wire harness drawings conforming with customer requirements and industrial drafting standards.
• Design of hardware fixation components such as brackets clips and mounting points using 3D modelling module
• Review and understand device and component technical datasheets.
• Conduct detailed Study and Analysis for Project Scope Methodology Estimation and Delivery schedule preparation.
• Create and understand schematic drawing creation\xc2\xb7 Mechanical:
• Hydraulic Design: Design of hydraulic systems selection of Hydraulic components and fittings and Hydraulic routings using Pro-E Wildfire
• Structural Design: Design of structural members bearings gearing heat transfer and engine related equipment machined parts castings and weld fabrications.
• Component Design: Design test analyse machined parts castings weld fabrications and other components of mechanical systems and processes
• FEA: Calculate to analyse structural integrity system loads and fatigue life using thorough knowledge of finite element analysis
• Weld Design: Design test and analyse weldments and welding structural components.
• Vehicle Integration and Assembly: Contribute to Mechanical/ Electrical integration as a part of vehicle integration
• Compute and estimate loading on structural members air/hydraulic flow velocity rates cylinder speeds steering system calculations pump inlet conditions and heat transfer calculations on air/hydraulic/fuel systems\xc2\xb7 Present new concepts to customers.

Measures of Outcomes: * Customer Satisfaction - Based on feedback from customer

• Adherence to schedule / timelines
• Adherence to SLAs where applicable
• Number of defects post delivery
• Number of non-compliance issues
• Percentage reduction of reoccurrence in known defects
• Defined productivity standards for project
• Completion of all mandatory training requirements

Outputs Expected:

Design: * Understand the design requirements

sheet metal design guidelines
Stack-up analysis
Weldment
Mining Design guidelines
Electrical component selection
Hydraulic Fitting selection
casting knowledge
large assembly management as well as schematic diagrams for Electrical and Mechanical

Errors: * Identify

analyse and rectify drawing errors
technical errors
PLM & PDM errors and model errors

Document: * Create documentation for one\'s own work

• Input output folder maintenance

• Status update in Project tracker

• Comply with project related reporting standards/process

• Design review presentation

• Review updated log

• Maintain documents for audit purposes

Manage knowledge: * Create/model procedures

documents
checklist
Model QC
workflow
etc.

PLM & PDM: * Adhere to PLM & PDM process

Requirement Analysis: * Understand the inputs

client expectations
and work scope

Learning and Growth: * Improve domain competency

• Improve soft skill competency by attending trainings and webinars.

Teamwork: * Review team members work and ensure high quality output

Skill Examples: * Ability to explain and communicate the design / development to the mentors/leads

• Ability to perform interference check against top level assembly
• Ability to create harness drawing wire table and electrical components selection
• Ability to manage and guarantee high levels of cohesion and quality
• Ability to perform and evaluate new design using FEA and calculate by hand
• Good written and verbal communication skills
• Proactively seek help wherever it is required
• Ability to work in a team with strong interpersonal skills
• Ability to think analytically and conceptually

Knowledge Examples:

• Appropriate 3D Software Modules
• GD&T
• Stack-up analysis for new design
• DFMEA
• Value Analysis-Value Engineering to reduce product cost.
• Knowledge about customer domain and sub domain
• Prior experience with documentation and specific definition of system specifications.
• Domain knowledge of Off High-way mining equipment Electro-mechanical Automotive Casting Plastic Semiconductor Medical Aerospace Heavy machinery.
• Proficiency in Creo Cabling Piping Sheet metal Auto CAD FEA Part modelling Casting Electrical Schematic Drawing MBA (Model Based Assembly or Paperless drawing).

Additional Comments:

Requirements : \xe2\x80\xa2 Excellent English language verbal, written and interpersonal communication skills. \xe2\x80\xa2 Proficient in technical publishing software: \xe2\x80\xa2 Adobe Suite: FrameMaker, Acrobat Pro DC, Adobe Illustrator \xe2\x80\xa2 DITA XML: Oxygen Editor \xe2\x80\xa2 Graphical: Inkscape, Notepad++, and MS Paint \xe2\x80\xa2 MS Office Suite: Word, PowerPoint, Excel, and Outlook \xe2\x80\xa2 Demonstrated experience in creating graphics with rule-based parametric 2D/ 3D CAD systems. \xe2\x80\xa2 Expert knowledge and experience to create illustration using some of the following software: \xe2\x80\xa2 Siemens TeamCenter and NX \xe2\x80\xa2 Technical acumen with experience working in a high-tech engineering environment with knowledge of industrial equipment systems. \xe2\x80\xa2 Ability to work in a cross-functional organization and multitask on multiple projects. \xe2\x80\xa2 Must be a quick learner, self-starter, with strong attention to details and can work with minimal supervision in a fast-paced, high-tech environment. \xe2\x80\xa2 Requires working closely with US based teams during US working hours. Role and Responsibility : \xe2\x80\xa2 Independently working on technical writing projects: ensure the projects are completed on time, objectives are defined, necessary planning activities (e.g., plan authoring, review, estimation of deliverables, milestones, validating and testing, reliability, and risk mitigation of documents). \xe2\x80\xa2 Ensure project results meet requirements and ensure technical accuracy, quality, reliability, schedule. \xe2\x80\xa2 Develop DITA XML topic using markup element tags, attributes, maps, and conditions. \xe2\x80\xa2 Works with Subject Matter Experts (SMEs), engineers, mechanical and electrical designers to identify the most effective product and service illustration solutions that are highly accurate and complete. NOTE: Required candidate who can Join with in 30 days.

UST