Job Description

:

Btech/Dipolima Degree, Min 8+ Experience, 5 Years in Oil & GAS as QC inspector in EPC Companies on contruction projcets. CSWIP 3.1 Qualified

Reports to Project Quality Manager and to perform inspection before , during & after welding activities. Check the bevel preparation - root gap, bevel angle, root face & joint cleanliness Verification of approval of procedure, welder, consumables & calibration certification Verify Preheat & back purging requirements Verify Size & type of electrodes used as per WPS. Checking weather conditions, weld area to be covered properly & interpass temperature. Carrying out visual inspection as per code & specification requirement., After completion of visual inspection of weld joint , offer for NDT and Monitoring & checking NDT requirements. Check for PWHT & Hardness requirements as per service & code requirements Identify repairs and ensure identified defects are repaired and re-NDT is performed & accepted. Knowledge on code & specification requirement - ASME B31.3 /B31.4/ B31.8 , ASME IX, ASME IIA/B/C & API 1104. Raise RFI to client as per ITP requirement & co-ordinate for inspection . Perform surveillance inspection and raise NCR if any non conformity observed. Prepare work procedure & ITP as per project specification & code requirement . Follow up with client for approval. Potential issues are to identified and take corrective action immediately. Aramco standards Knowledge

Preferable

Previous Saudi Aramco experience as QC Welding Inspector & Aramco-CBT EXAM-PID Welding passed record preferable.
*

Job Type: Full-time

Pay: Up to ?170,000.00 per month

Work Location: In person