Job Description

Job Title: Maintenance Technician Department: Production / Maintenance Reports to: Plant Manager / Production Supervisor Job Summary The Maintenance Technician is responsible for ensuring the continuous operation of the automated or semi-automated brick/block making plant. This role involves the daily inspection, troubleshooting, and repair of hydraulic, mechanical, and electrical components to minimize downtime and ensure product quality. Key Responsibilities 1. Hydraulic System Maintenance Pressure Management: regularly monitor and adjust the hydraulic pressure settings (tonnage) to ensure bricks/blocks meet the required compaction density. Leakage Control: Inspect hydraulic hoses, cylinders, and power packs daily for oil leaks. Replace worn-out O-rings and seals immediately to prevent pressure drops. Fluid Maintenance: Check hydraulic oil levels and temperature. Ensure the oil filter is cleaned or replaced periodically to prevent contaminants from damaging the pump. 2. Mechanical Maintenance Mold Management: Perform frequent checks on the mold box and tamper head for alignment. Replace or repair liners if the bricks show dimensional variations. Vibration System: Maintain the vibrating table (unbalanced mass motors) by checking bolt tightness and bearing condition. Loose bolts here can lead to cracks in the machine frame. Conveyor & Pan Mixer: Adjust conveyor belt tension to prevent slipping. Replace mixing blades (scraper/shovel) inside the pan mixer when they wear down to ensure uniform mixing of raw materials. 3. Electrical & Automation Support Sensor Calibration: Clean and align proximity sensors (limit switches) that control the automatic feeder and pallet movement. Motor Health: Inspect induction motors for overheating or unusual noise. Check connections in the control panel for loose wires that could cause short circuits. Panel Operation: Assist in troubleshooting basic PLC (Programmable Logic Controller) errors or relay logic failures during machine stoppages. 4. Preventive Maintenance (PM) Lubrication: Execute a strict greasing schedule for all moving parts, specifically the guide rods (columns) of the press machine and conveyor bearings. Cleaning: Ensure the machine is cleaned of hardened concrete/fly ash mix at the end of every shift to prevent jamming of moving parts. Requirements & Qualifications Education: ITI or Diploma in Mechanical/Fitter/Electrician trade. Experience: 2-5 years of hands-on experience in Hydraulic Press Machines or Concrete Block Plants. Technical Skills: Proficiency in Arc Welding and gas cutting (essential for frame repairs). Ability to read hydraulic circuit diagrams. Basic understanding of 3-Phase electrical connections. Physical: Ability to lift heavy tools/parts and work in dusty environments. Key Performance Indicators (KPIs) Machine Uptime: Maintaining >95% machine availability during production shifts. Mean Time To Repair (MTTR): Speed of resolving breakdowns (target: <30 mins for minor issues). Spare Parts Management: Maintaining minimum stock levels of critical spares (V-belts, oil seals, bearings) to avoid stock-out delays.

Job Types: Full-time, Permanent

Pay: ?9,500.00 - ?33,271.61 per month

Work Location: In person